Large Capacity AC/DC Inverter (Non-Certified)

The UMA large capacity inverter converts DC to AC to power a ELST panels or set of light strips (power requirements vary by surface area). The inverter has 2 wires and mounting wings, which are the GND. Connect black wire to ELST or light. Connect the red colored power wire (see chart below) to your DC source or instrument panel light switch thru 1A fuse. When using a dimmer, connect it between power and the inverter to vary the DC supplied to the inverter. The inverter AC output is black wire, which carries AC current to power the ELST or light strips. Use 20-24 AWG twisted pair wires (or twist two wires a minimum of 8 turns per foot) for all connections between inverter and lights. You may connect up to 30 UMA light bezels (and/or internal instrument lights) or three large ELST  in parallel to one inverter (i.e. Beechcraft Bonanza).

DO NOT GROUND OUTPUT WIRE ANYWHERE UNDER POWER, DO NOT TOUCH BLACK WIRE WITH BARE HANDS.